From:Keith Beidelman 
Subject:PRO-2032 Scanner Modifications

   I had been looking for a cellular restoration modification for the
PRO-2032.  I
finaly gave up looking and ordered a service manual for the radio.  It turns
out that
this radio is a next generation design of the PRO-2006.  It still uses
option selection
diodes which are scanned as an extention to the keyboard matrix.  The diodes
for the
option selection are surface mounted in a soldered in shield on the bottom
side of the
circuit board.  By examining the artwork for the circuit board which was
given in the
service manual along with the schematic, it was determined that the scanner
can be
modified as follows:

  1) Cut the lead on the anode of D35
  2) cut jumper JM69 in half
  3) solder a wire between the anode of D35 and the side of the jumper
closest to
     the label for JM69.

   If you have a FAX available, I can send you some documentation which will
make this
procedure clearer.

   I have implemented this modification on my PRO-2032.

Amsterdam



View Our Stats










CLICK FOR A FREE DOMAIN NAMES HTTP://WWW.YOURNAME.TK FOR YOUR OWN WEBSITE




IF YOU CLICK HERE AND YOU CAN VOTE FOR OUR FREE WEBSITES IN THE TOP 100 LIST




WANT A TOP RANKING ? USE THE ULTIMATE SOFTWARE SUITE FOR WEB SITE PROMOTION




FreeWebSubmissions Submit Your Site To The Web's Top 50 Search Engines For Free




THE ALEXA BANNER, THIS BANNER GIVES THE DALLY STATISTICS OF THIS FREE WEB SITE



The World of Free Packet Radio Software Amsterdam

---

The World Of Free Packet Radio Software Amsterdam The Netherlands